跳至主要内容

Safety Operation of Flat Screen Printer


In order to specify the safety requirements for printing operations and guarantee the personal safety of operators and the normal operation of equipment, safety operation procedures is quite necessary. All operators are responsible for and perform this operating standard. Now, let us introduce the working procedures for you:
Above all, it’s of great importance to check whether the power supply, circuit and oil supply temperature valve of the machine are normal and ensure that the ground environment is clean and hygienic.
Second, check the operation parts of the machine and the operation of the hydraulic pump. If there is any debris, turn the power on after determining the normal.
Third, when lifting the Flat Screen Printing Machine roller and replacing the rubber roller, it is necessary to lift it gently, and the roller should be balanced with force, so as to avoid the crushing of the roller.
Fourth, when cleaning the surface of the printing roller with solvent, it’s advisable to wear protective gloves to avoid the burning of the solvent on the skin. If it is sprayed into the eyes, rinse it with water in time.
Fifth, when cleaning the scraper, wipe the knife edge with a thick rag to avoid scratching the hand.
Sixth, wipe the cleaning roller and scraper must not be hung on the machine to avoid the machine corrosion.
Seventh, when producing and testing a sample, do not put your hand under the rubber roller to avoid crushing.
Eighth, in the production, the rubber roller is clean at any time. If the problem is handled while rotating, the clothes and cuffs should be fastened to avoid getting involved. If you have a serious problem, the machine needs to be shut down quickly.
Finally, When the amount of static electricity in the production process is large, water can be sprayed around the Flat Screen Printer to maintain the air humidity and reduce static electricity.

标签：

评论

发表评论

此博客中的热门博文

Cleaning Information about Hot Air Stenter

Cleaning Hot Air Stenter properly help to extend service life of machines. I would like to introduce some cleaning information for you below. All the printing and dyeing company wants to make full use of stenters and maintain high evaporation efficiency. Once the equipment is put into use, it's the manufacturer's own business. One of the defects of common stenters is the decrease of efficiency caused by the clogging of the cotton dust filter. During each operation, the cotton dust and other impurities filtered out from the circulating air system of drys gradually accumulate, generate resistance, reduce the pressure of the air vent, and thus decrease the evaporation efficiency. At present, many dryers and heat treatment equipment are still using a plug-in filter. If they do not open the door of the drying room, the machines cannot be cleaned. Because the cleaning of the filter and the re-heating of the drying room will waste time, it will have a bad impact ...
发表评论
阅读全文

How to Clean Flat Screen Printing Machine

Our Flat Screen Printing Machine is environmentally friendly, which does not cause pollution. However, in order to make the equipment last longer, it is necessary to adopt several methods to clean the equipment. First, the electronic cleaning method achieves the effect of descaling and anti-scaling by electrons. Second, electrostatic cleaning method, as the name suggests, is to achieve anti-scaling and descaling effects through the static electricity of the flat screen printing machine. Third. it is worth noting that the main functions of the mechanical cleaning method of the flat screen printing machine are the cleaning device and the blade cleaning method, the drill pipe cleaning method and the shot blast cleaning method. Fourth. the physical cleaning method is mainly to remove the dirt component by applying the external force to various soils by means of hand tools and machinery. That is the method of not changing the original chemical molecular component. La...
发表评论
阅读全文